Wegener UNITY4000 Bedienungsanleitung PDF herunterladen (Seite 3)

ee--mmaaiill::

[email protected]

vvooiiccee::

360.854.9559

ffaaxx::

360.854.9479

USC-16/SG Installation and Operation Manual

PRODUCT DESCRIPTION

The USC-16/SG is an upgrade for the USC-16, Universal Satellite Channel

Controller. After the upgrade has been installed, the USC-16 will be referred to as

the USC-16/SG. The USC-16/SG is completely programmed with services of most

StarGuide affiliates. The USC-16/SG is field programmable to switch audio ports,

audio port channel swapping, services, providers and carriers on the StarGuide II and

III satellite receivers. The USC-16/SG, when operated with contact closures or seri-

al control, will provide sixteen, 31 - character string selections for the StarGuide II or

III receivers. Programming of the USC-16/SG is straightforward. Using a NON-

DEDICATED computer along with the communication program (HyperTerminal)

included with the Windows 95/98/ME/2000/NT operating system. After the desired

locations have been programmed, the USC-16/SG may be unplugged and installed.

The program information is stored in non-volatile memory.

UNPACKING AND HANDLING

Please examine your USC-16/SG for any damage that may have been sustained dur-

ing shipping. If any is noted, please notify the shipper immediately. Retain the

packaging for inspection by the shipper. The package should contain the USC-

16/SG upgrade chip, 1 - modular cable /w 9 pin male D-sub “SG-9” serial adapter

and this manual.

UPGRADE PROCEDURE

Please follow these steps:

1 Remove power and ALL connections from the USC-16.

2 Remove the cover.

3 Be sure to follow proper “STATIC SENSISTIVE DEVICE” procedures with

the IC in position U3.

4 Locate U3 and carefully remove.

*NOTE: Use an IC puller or small (Greenie) screwdriver to pry out U3.

5 Carefully insert the USC-16/SG upgrade IC into U3.

*NOTE: Be sure to observe the correct pin orientation.

6 Replace the cover and reattach all cabling.

7 Remove JP-3, if installed

8 Follow the procedure below.

WEBSITE:

Visit our web site for

product updates and

additional information.

1 2 3 4 5 6 7 8 ... 14 15

Kommentare zu diesen Handbüchern

Keine Kommentare

Wegener UNITY4000 Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Wegener UNITY4000