Wegener UNITY4000 Spezifikationen PDF herunterladen (Seite 19)

If you have more than one Wegener receiver connected to your satellite antenna but have no

available splitter ports you may either (1), attach the DC Block to the AMR-100 receiver and

then install a splitter with more unused ports (not provided) or (2), pick a Wegener Unity 4000®

receiver to which you’d like to attach the provided 2 port splitter. Case (1) is the preferred

method, but if you have a unique situation or if you must install using case (2), please call AMB-

OS technical support for a consultation (877-AmbOS2U or 877-262-6728).

Rev. 36 – Firmware version 1.61 19

2008

WARNING

If you have only one Wegener Unity 4000® receiver and it supplies the DC power

to the LNB, the newly-added AMR-100 must have the DC Block installed on it!

RF from

a multiple

splitter

RF from

a multiple

splitter

RF from a

multiple

splitter

DC Block

DC Pass

Connect the DC

block to the

AMR-100

Connect the RF to

the splitter

AMR-100

Connect the RG-6

cables to the outputs of

the splitter

Out

DC Block

Connect one RG-6 cable from the

DC pass port of the splitter to the

Wegener Unity 4000

Wegener

Unity 4000

Disconnect the

RF from the

Current Receiver

Wegener

Unity 4000

AMR-100

DC Pass

Out

RF from a

multiple

splitter

Connect the other RG-6

cable to the other port on the

splitter and to the DC block

on the input on the AMR-100

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 58 59

Kommentare zu diesen Handbüchern

Keine Kommentare

Wegener UNITY4000 Spezifikationen Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger Wegener UNITY4000